Oil Change Procedure

QuickFit Operating Instructions

1. Remove oil fill cap to alleviate crankcase pressure buildup.
2. Attach compressed air supply to Filter Purge Tool.
3. Attach Filter Purge Tool to male quick disconnect on QuickFit Valve.
4. Hold lever on Filter Purge Tool for 10 seconds to push engine oil through oil filter and into engine sump.
5. Remove Filter Purge Tool.

1. Attach female quick disconnect from waste oil reel to male quick disconnect on QuickFit Valve.
2. Turn waste oil pump on to remove oil from engine sump.
3. Replace engine oil filter(s). When waste oil pump has finished removing all oil from engine sump, remove waste oil line.

1. Attach female quick disconnect from clean oil reel to male quick disconnect on QuickFit Valve.
2. Turn clean oil pump on to refill oil through the new oil filter.
3. When clean oil pump has finished refilling oil to refill capacity, remove clean oil line.
4. Reinstall engine oil fill cap.

Engineer QuickFit Into Your Maintenance Process

Tell RPM what you build, sell, service, or operate—and what maintenance infrastructure is already available. RPM will help identify the application-specific QuickFit configuration and supporting equipment. New to the system? Start with the QuickFit overview.

Secret Link