Specifiers

Specify the Start.
Specify the Service.

Every oil change is safer, with hot oil purged before a technician touches it. It’s cleaner, with used oil sealed in containment from engine to tank. And it’s faster, with shorter service windows from commissioning forward.

Explore our products

Every engine is most vulnerable at the moment it starts. Prelub™ engine pre-lubrication system automatically builds oil pressure before the engine cranks — eliminating dry-start wear, reducing warranty risk, and extending engine life.

Prelub protects at startup. PostLube protects at shutdown, circulating oil through the turbo to prevent coking without extra idle time — it runs standalone or paired with Prelub for complete startup-to-shutdown coverage.

Periodic Prelub stands on its own: it cycles oil on a schedule to keep standby and backup engines ready to start after weeks of sitting idle.

Specified by OEMs. Installed on power generation systems, construction equipment, mining machinery, marine engines, and over-the-road fleets worldwide.

Less engine wear. Fewer costly repairs. More reliable starts, whenever the job calls. 

RPM offers two proven fluid service solutions — QuickFit and QuickEvac — that move oil and fluids through a completely sealed path. Not one drop touches the ground, eliminating spill risk, environmental liability, and the exposure fines that follow.

QuickFit is the patented single-connection system: one hookup purges filters, evacuates the sump, and refills the engine — a full service cycle without buckets, drain pans, or multiple manual steps.

QuickEvac is the simpler, single-step tool: connect to the QuickEvac bracket, point at the waste container, press the button. Used oil flows straight into containment — fast, one-button evacuation with no purge or refill step required.

Safer technicians, safer engines. Cleaner bays. Faster and more predictable service. 

Pre-lubrication and evacuation only protect the engine if they can get to it. RPM’s Mobile Service Tools puts both capabilities into self-contained platforms built for mobilization in the shop bay, the yard, or the field.

SmartSkid and the SmartTrailers carry both functions in one unit: an on-board pump handles refill, a remote pump handles evacuation, and separate aluminum tanks keep new and used oil isolated. Wireless monitoring tracks tank levels and shuts pumps off automatically — built-in rollover protection and 110% containment keep it safe to run anywhere.

SmartCart brings the same contained evacuation to shop bay service — no drain pans, no open containers, just a direct line into the waste tank. The Pump Table anchors it all at the bulk tank, with twin pumps and iPad-controlled inventory tracking for fast, organized fills and disbursement.

Safer field service. Cleaner shop bays. Faster turnaround, wherever the equipment sits.

Safer, cleaner, faster —
written into the spec.

Service time is reduced by up to 80% versus traditional methods. From a single connection: 

PURGE

Purge

Clear hot oil from filters and engine passageways for a more complete oil change—removing up to 10% more oil than traditional methods while reducing dripping, cleanup, and technician exposure.

Evacuate

Evacuate

Seal used oil into containment from engine to tank — not one drop touches the ground. Cleaner shop. Cleaner environment.

REFILL

Refill

Pump clean replacement oil through new filters and the pressure side of the engine before it returns to the sump, prelubricating the engine during the refill process.

Client Testimonials

WATCH A DEMO

FULL OIL CHANGE IN LESS THAN 10 MINUTES

Total service time: 9 minutes, 16 seconds
Manufacturer: Peterbilt
Engine: Cummins, ISX15

News & Updates

Sign up for news and updates from RPM

Secret Link