Oil & Fluid Evacuation

Oil Evacuation Systems for Heavy Equipment

Fluid changes are routine, but without an oil evac system, they’re where lost time, spills, and safety risks add up. RPM’s patented evacuation systems are engineered to each machine to make every change safer, cleaner, and faster across the fleet.

Control the Fluid
From Start to Finish

RPM’s 3-step process – Purge, Evacuate, Refill – takes the risk and the guesswork out of fluid maintenance. From a single connection: 

PURGE

Purge

Clear hot oil from filters and engine passageways for a more complete oil change—removing up to 10% more oil than traditional methods while reducing dripping, cleanup, and technician exposure.

Evacuate

Evacuate

Move used fluid through a closed connection directly to final containment instead of relying on gravity and drain pans.

REFILL

Refill

Pump clean replacement oil through new filters and the pressure side of the engine before it returns to the sump, prelubricating the engine during the refill process.

Why Change?

The Old Way Builds Risk Into Every Service

Every open container, manual transfer, hot filter, and trip beneath or on top of the machine creates another opportunity for delay, injury, exposure, spills, and contamination. Repeated across every asset and service interval, those unnecessary steps become a costly operating pattern.

The RPM three-step system establishes a more controlled standard: Purge. Evacuate. Refill.

Featured Oil Evacuation Systems

RPM configures each permanent system around the equipment, engine, service requirements, and supporting maintenance infrastructure. For one connection that handles purge, evacuation and refill, see QuickFit, RPM’s evac oil change system. For an onboard evacuation pump, see QuickEvac, RPM’s engine oil evacuation system.

quickevac 003

QuickEvac

Hover to learn more

QuickEvac

One button evacuation tool that pumps oil into a waste container via an onboard pump.
Explore QuickEvac
rpm quickfit fitting

QUICKFIT

Hover to learn more

QUICKFIT

Single connection fluid service that purges, evacuates, and refills in minutes. Safer, cleaner, and faster than traditional bucket and drain methods.
Explore Quickfit
rpm ac 8 pump kit 1

AC 8 Pump Kit

Hover to learn more

AC 8 Pump Kit

AC powered pump kit for shop or field tooling providing QuickFit fluid transfer to existing service carts and skids.
rpm auto off evac tool 1

Auto Off Evac Tool

Hover to learn more

Auto Off Evac Tool

Auto shutoff evacuation tool that stops when the sump is empty, providing hands free operation for large capacity tanks and reservoirs.
rpm barrel refill kit 1

Barrel Refill Kit

Hover to learn more

Barrel Refill Kit

Pickup tube and hose for barrel refills providing clean, spill free oil transfer directly from container to engine.

Lube Truck Conversion Kit

Hover to learn more

Lube Truck Conversion Kit

Retrofit your lube truck to evacuate oil directly into the waste tank and eliminate drain pans and ground spills.
RPM MultiVac

MultiVac 

Hover to learn more

MultiVac 

One button evacuation tool that pumps oil and additional fluids into waste containers via an onboard pump.
rpm oil filter purge tool 1

Oil Filter Purge Tool

Hover to learn more

Oil Filter Purge Tool

Air powered filter purge tool to remove hot oil before changing filters, preventing spillage and protecting technician hands.
rpm quickfit bay lube truck conversion kit 1

QuickFit Bay/Lube Truck Conversion Kit

Hover to learn more

QuickFit Bay/Lube Truck Conversion Kit

Retrofit kit that adds QuickFit fittings to existing lube trucks or bay tooling for safer, cleaner, faster service without new equipment.

Remote Activation Switch

Hover to learn more

Remote Activation Switch

Manual activation switch for QuickEvac to operate the pump by hand during conversions, refill work, or custom installations.
rpm scet pump kit 12 24vdc 1

SCET Pump Kit 12/24VDC

Hover to learn more

SCET Pump Kit 12/24VDC

DC powered pump kit that runs on vehicle power providing QuickFit fluid transfer to service trucks without dedicated electrical connections.
rpm smart table 1

Smart Table

Hover to learn more

Smart Table

Shop mounted pump station with iPad inventory control for fast fills and evacuating field equipment directly from bulk tank.
rpm smartcart 1

SmartCart

Hover to learn more

SmartCart

Compact shop cart that evacuates oil directly into 25 gallon containment providing safer, cleaner bay service without drain pans or spills.
Learn More

Looking for QuickFit Operating Instructions?

Partnership means support at every stage of the process.

A better maintenance standard must work with your equipment, your technicians, and the service infrastructure you already use. RPM helps teams move from evaluation to a repeatable operating process.

Identify machines, engines, fluid compartments, and service environments.

Define the system, fittings, hose routing, mounting location, and service access.

Coordinate pumps, hoses, reels, tanks, controls, adapters, and existing infrastructure.

Provide application instructions and establish a consistent service method.

Extend the standard to additional assets, locations, and equipment types.

Built for Demanding
Equipment Across Industries

Explore oil and fluid evacuation applications across your industry.

Tell Us What You Maintain

Share your equipment, engines, fluid compartments, and current maintenance process. RPM will help define the right on-machine system and supporting service configuration.

Fill Out Your Information Below

Secret Link