Prelub™

Prelub Engine Prelube System

Dry-start wear builds with every cold crank. Prelub™ automatically builds oil pressure through the existing start sequence and blocks cranking if it can’t. Your engines last longer between overhauls.

Prelub

What Is Prelub?

Prelub™ is an engine pre-lubrication system that builds oil pressure before the engine cranks. It works through the existing start switch: when the operator turns the key, Prelub™ pressurizes the lubrication system and fills the filters and oil passages first. Only then does the engine turn over. If pressure can’t be established, the engine won’t crank.

Engine Pre-Oiler and Prelube Pump

Prelub™ works as an engine pre-oiler. Its prelube pump moves oil through the engine before the starter turns it over, which is why buyers also search for it as an engine oiler or a pre lube oil pump. Whatever you call it, the job is the same: oil pressure first, then the crank.

Prelub

Wiring Terminals

Prelub™ connects to the machine’s existing start circuit. The operator turns the key as usual and pre-lubrication happens automatically, with no extra steps or training.

Pump Head

The pump builds oil pressure and flow before the starter engages, so bearings are protected from the very first revolution, not seconds later.

Oil Ports

Oil reaches every filter and passage before each start, including remote-mount filters that normally sit empty after an oil change or long shutdown.

Motor Housing

If pressure can’t be established, Prelub™ keeps the engine from cranking, preventing catastrophic damage from a low- or no-oil start.

How it works

Protection Built Into the Start Sequence

The operator turns the existing switch to Start.

The Prelub starter begins circulating oil without another operator action.

Clean oil fills remote filters, passages, and critical bearing surfaces.

The system verifies that oil pressure has been established.

Only then is the engine allowed to crank.

Products

Find the Right Tool for Every Fluid Service

Whether you service equipment in the shop bay, on the lot, or out on the job site, RPM has a tool built for that job. Browse our evacuation tools, pump kits, conversion kits, mobile service carts, skids, trailers, and engine pre-lubrication systems below. Hover over any product to see what it does.

RPM Prelub

Prelub

Hover to learn more

Prelub

Automatic engine prelube that pressurizes all oil passages before cranking, protects bearings, and minimizes dry start wear.
Learn More
RPM Periodic Prelub

Periodic Prelub

Hover to learn more

Periodic Prelub

Automatic periodic oil cycling for standby engines ensuring reliable startup capability after extended idle periods.
Learn More
RPM PostLube

PostLube

Hover to learn more

PostLube

Automatic post-shutdown cooling that protects turbos and minimizes idle time with no coking risk.
Learn More
rpm smartcart 1

SmartCart

Hover to learn more

SmartCart

Compact shop cart that evacuates oil directly into 25 gallon containment providing safer, cleaner bay service without drain pans or spills.
Learn More

Why Prelub

The First Revolutions Should Not Be the Driest

After shutdown, oil drains away from critical surfaces. Cold temperatures, high heat, long idle periods, large displacement, and remote-mounted filters can increase the time required for the engine pump to restore pressure. Prelub fills that vulnerable interval before rotation begins.

Engine Start Sequence

Oil Pressure First. Then the Crank.

In a conventional start, the engine turns before oil reaches the bearings. Those first revolutions run on whatever film is left from the last shutdown, and the wear adds up with every start. Prelub™ changes the order. When the operator turns the key, Prelub™ builds full oil pressure through every filter and passage, and only then lets the engine crank. Every start begins protected, and your engines last longer between overhauls.

Prelub start sequence

Explore Solutions for your Industry

RPM’s solutions are trusted across the industries where equipment failure is not an option.

Explore Solutions for your Business

Keep your machines in the dirt instead of the shop.

Learn More →

Increase utilization revenue and machine life with reduced risk.

Learn More →

Protect your machines and take on more projects.

Learn More →

Protect Every Start Automatically

Tell RPM what you build, sell, service, or operate, including the engine, starting system, duty cycle, environment, and shutdown pattern.

Upgrade Your Maintenance Process Today!

Secret Link