QuickFit
QuickFit Evac Oil Change System
QuickFit is RPM’s evac oil change system. It puts one connection on your machine for the whole fluid service: filter purge, evacuation, clean refill, level check, and automatic prelubrication. Connect to compatible service equipment anywhere, and compare it with RPM’s other oil evacuation systems.

What is QuickFit
- One connection on the machine. QuickFit permanently installs application-specific fittings and hoses, giving every fluid service a single access point.
- Five services, one hookup. Filter purge, fluid evacuation, clean refill, oil-level verification, and automatic engine prelubrication.
- Safer, cleaner, faster. Real fleets experience up to an 80% reduction in service time, and significantly fewer safety and spill exposures.

Keep Oil Contained
Connect compatible service equipment at one accessible point. Push hot oil from the filters back into the sump before removal to reduce handling and eliminate dripping and spills.
Protect the Start
Send clean oil through the new filters and back to the sump. Verify the oil level before startup, with automatic prelubrication building oil pressure before the engine is allowed to crank.
Evacuate Directly
Pump used oil from the sump directly to final containment, without an open drain pan. Remove emptied filters and install new ones with less residual oil to handle.
How it works
One Connection. The Complete Service Sequence.
- Connect
Attach compatible service equipment at the accessible QuickFit connection.
- Purge
Use compressed air to push hot oil from the filters into the sump before filter removal.
- Evacuate
Use the pump to transfer used oil from the sump directly to final containment.
- Refill
Pump clean oil via the QuickFit connection.
Why QuickFit
Safer, Cleaner, Faster – Every service. Every machine.
Traditional oil service relies on different access points, open pans, gravity draining, and repeated handling. QuickFit creates a permanent path through the machine so technicians can perform the same controlled process from one accessible service point. Application-specific engineering allows the process to be standardized without forcing every machine to have the same physical installation.







Products
Find the Right Tool for Every Fluid Service
Whether you service equipment in the shop bay, on the lot, or out on the job site, RPM has a tool built for that job. Browse our evacuation tools, pump kits, conversion kits, mobile service carts, skids, trailers, and engine pre-lubrication systems below. Hover over any product to see what it does.

QuickFit
QuickFit

AC 8 Pump Kit
AC 8 Pump Kit

Barrel Refill Kit
Barrel Refill Kit
Lube Truck Conversion Kit
Lube Truck Conversion Kit

Oil Filter Purge Tool
Oil Filter Purge Tool

QuickFit Bay/Lube Truck Conversion Kit
QuickFit Bay/Lube Truck Conversion Kit
QuickFit+ Bay/Lube Truck Conversion Kit with Transmission
QuickFit+ Bay/Lube Truck Conversion Kit with Transmission

SCET Pump Kit 12/24VDC
SCET Pump Kit 12/24VDC

Smart Table
Smart Table

SmartCart
SmartCart
WATCH A DEMO
FULL OIL CHANGE IN LESS THAN 10 MINUTES
Total service time: 9 minutes, 16 seconds
Manufacturer: Peterbilt
Engine: Cummins, ISX15
Engineer QuickFit Into Your Maintenance Process
Tell RPM what you build, sell, service, or operate—and what maintenance infrastructure is already available. RPM will help identify the application-specific QuickFit configuration and supporting equipment.
Explore Solutions for your Industry
RPM’s solutions are trusted across the industries where equipment failure is not an option.
- Construction
- Power Generation
- Data Centers
- Equipment Rentals
- Transportation & OTR
Explore Solutions for your Business
- OEMs
Keep your machines in the dirt instead of the shop.
- Machine Rentals
Increase utilization revenue and machine life with reduced risk.
- Fleet Owners & Operators
Protect your machines and take on more projects.
- Specifiers
Write proven, OEM-trusted engine protection into every generator spec.
- Critical Facility Managers
Shorten every service window and keep every generator ready to run.