Engine Pre-Lubrication Systems

Engine Prelube & Pre-Lubrication Systems

Engines are most at risk at startup, after a hard shutdown, and on standby. RPM’s engine prelube and pre-lubrication systems protect all three. Prelube puts oil pressure in place before the engine turns over.

What an Engine Pre-Lube System Does

Before Startup

Before Startup

On diesel engines and others, Prelub™ builds oil pressure through every filter and passage before the engine cranks.

After Shutdown

After Shutdown

PostLube circulates cooling oil through the turbocharger the moment the key turns off.

During Standby

During Standby

Periodic Prelub cycles oil through the engine on a programmed schedule, so it's ready the moment it's called.

Engine Start Sequence

Oil Pressure First. Then the Crank.

In a conventional start, the engine turns before oil reaches the bearings. Those first revolutions run on whatever film is left from the last shutdown, and the wear adds up with every start. Prelub™, RPM’s engine prelube system, changes the order. When the operator turns the key, Prelub™ builds full oil pressure through every filter and passage, and only then lets the engine crank. Every start begins protected, and your engines last longer between overhauls.

Prelub start sequence

Partnership means support at every stage of the process.

A better maintenance standard must work with your equipment, your technicians, and the service infrastructure you already use. RPM helps teams move from evaluation to a repeatable operating process.

Identify machines, engines, fluid compartments, and service environments.

Define the system, fittings, hose routing, mounting location, and service access.

Coordinate pumps, hoses, reels, tanks, controls, adapters, and existing infrastructure.

Provide application instructions and establish a consistent service method.

Extend the standard to additional assets, locations, and equipment types.

Protect the Engine at Every Vulnerable Moment

Tell RPM how the engine starts, stops, and sits. We will help determine the right pre-lubrication, post-lubrication, or standby-protection configuration.

Upgrade Your Maintenance Process Today!

Secret Link